Water not draining from the sinks is one of the most common sights in homes. Clogged sinks get worse if you don’t fix the issue on time. However, you can solve sink drainage problems easily with professional help.
Before calling the big guns, do these things:
Table of Contents
Pour Boiling Water
First answer for how to fix sink drainage problems is pour boiling water.
Great, hair and soap residue tend to get stuck in sink drains. Pour boiling water inside your drain to loosen the blockage. As it is one of the easiest solutions to sink blockage, you must try it before anything else.
Boil half a gallon of water to pour directly inside the drain opening.
Pour the boiling water directly into the drain opening.
Open the faucet to notice if water passes steadily. When the water stands still or drains slowly, you may repeat the same process.
Is your drain linked to PVC pipes? Don’t try this technique, as boiling water can melt and even damage the plastic material.
In case you fail to unclog the drain even after a second attempt, try another alternative. Sometimes, pouring boiling water doesn’t work.
Examine the Trash Disposal
Garbage deposits can be one of the biggest causes of sink drainage. Don’t turn on the clog in disposal as that would break the sink blockage.
You can’t turn on the overheated disposals but switch on the “reset” button at the bottom/side of the reboot unit. Once you reset the disposal, please turn it on again to remove the blockage.
The unit can be broken or jammed if you hear a subtle humming after turning on the disposal.
Make sure you detach power from the unit and attach your hand to the garbage disposal before taking any step to clean trash deposits. Then, you can break the clog by turning blades.
After unclogging garbage deposits, turn the power back again and check the disposal. If everything seeks to play, turn the tap to check if the sink drainage problems persist. Let the experts do the task if you find it hard.
Plunge Draining Blockages
When you realize that disposal is the reason behind drain blockages, use a plunger. It is advisable to use a flat-bottomed plunger to remove the blockage.
Fill half of your sink with warm water until it seals your drain surroundings. Place the plunger on the top of your drain. Pump upwards and downwards quickly as many times as possible.
After pumping, remove the plunger and check if water passes via the drain. Repeat the same technique until water smoothly passes through the drain.
In case your sink doesn’t drain perfectly even after repeatedly plunging, try the next technique.
Use Vinegar and Baking Soda to Unclog Drains
The next answer for how to fix sink drainage problems is vinegar and baking soda.
Vinegar and baking soda are easily available in almost all homes. To solve sink drainage issues, use a bowl or cup to eliminate standing water from the sink.
Then pour a cup of baking soda inside the drain with a spoon or spatula if required. Pour white vinegar in front of the drain opening.
To seal the drain opening, place a cover /stopper on the drain. Wait for 10 to 15 minutes for the mixture to sit. Once the mixture settles down, remove the cover/stopper and pass tap water via the drain.
If you feel the technique is working, you can repeat this process to break the drain blockage. Otherwise, call experts to handle it.
Implement Plumber’s Snake
Stubborn clogs need something as practical as a plumber’s snake to remove the blockage.
When the snake confronts a blockage, crank its handle to eradicate debris and throw it outside your drain. Electric Snakes are quite a more effective tool to unclog drains.
In case you don’t have a plumber’s snake, go for a wire coat hanger. With a pair of needle-nose pliers, elongate the hanger into a long piece of wire. Make sure the end is hooked, as that would help you to collect the debris.
You can also implement the pliers to adjust the hook angle to pass via the drain opening. Though you can use any tool to fix sink drainage problems, make sure you can pass it through the drain for a few feet.
Never push the equipment with full force, as the pressure can push the clog down the pipe. If you ever think that your tool’s tip faces instructions, stop using it to remove dirt via the drain.
Repeat this technique until the blockage goes. Pour only hot water to see the results. For ensuring the right results, call professionals as they safely handle the tools and know the right process.
Read Also: How to Get Wax Out of Carpet Without Iron
Bottom Line
When you have sudden sink drainage problems in your home, don’t panic and waste your time thinking about what to do next, as you already know after reading this post.
If you don’t get the desired results even after repeated attempts, get in touch with professionals with years of experience handling such issues.